kodak easyshare 5500 printer manual

Important: Insert the ink cartridge immediately to prevent any drying of the ink.
Product Overview Default Display Settings Default settings are provided for each option.
Avoid areas where ventilation ducts, open doors, or high traffic might expose the EasyShare AiO and paper to high levels of dust and debris.
15 2 Getting Started Getting Started It is important to find a good location for your AiO Printer.2 On/Off Light Flashes red when in an error state.5 Tear open the color zuma deluxe crack game ink cartridge bag at the notch and remove the ink cartridge.Carrier stall during pick.9 Close the printer access door.Pull the photo tray out to disengage if you do not want to print 4 x 6 inch pictures.Photo tray light.2 Insert the bottom of the duplexer into the printer and press the top in until it clicks.Memory Stick Duo miniSD MicroSD (TransFlash) The Memory Card light is a green LED located near the memory card slots.4 Remove and discard the clear plastic casing and the orange protective cap.EasyShare 5500, all-in-One Printer, users Guide, summary of the content on the page.



Change both ink cartridges.
Black ink cartridge not readable.
19 Menu Button Displays the main menu screen.
Chapter 1 Control Panel Layout Number Name Description 1 OnOff Button Turns your EasyShare AiO on or off.
You can buy optional accessories to enhance your Kodak EasyShare AiO experience.7 Install the ink cartridges.None Light is blinking steady.Color ink cartridge not readable.7 Insert the color ink cartridge into the printhead.Place the printer on a clean flat surface, in a dry location, and out of direct sunlight.The printer to power supply cord Reseat the printer to power is not properly connected to the supply cord.Kodak EasyShare 5500 All-in-One Printer Driver for Operating Systems.