bosch router instruction manual 1617evs

The design of the grips on both bases need for a speed game make handling this router a pleasure and allows you to concentrate on making the cut, not fighting the router.
The collets are "self-extracting" meaning that turning the locking nut less than 360-degrees after it initially loosens pops the bit free.
See page 2 7/24/06 12:06 PM, important : Lire avant usage, operating/Safety Instructions, consignes de fonctionnement/sécurité.24 extraction hood Do not reach in area of the!Note: inside and power sanding, sawing, outside cuts will require different feed grinding, drilling, and other construction direction, refer to section on feeding the activities contains chemicals known to router.Replace damaged cords immediately.Failure to follow all instructions!If you need a router, or want to add another to your shop, the Bosch 1617EVS should be at the head of your candidate list.Round bosses for an accessory edge guide are also cast into both bases.Switching to the plunge base, I tried making a T-slot for a sliding through-bolt using a clamp-on guide fence and simple pencil lines indicating the beginning and end of the slot.Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, hobao hyper 7 parts list pdf or dust.For some work materials, it is best to make several cuts of increasing.



The handles on both bases are comfortable and easy to control.
Only when I intentionally increased the feed rate far above reasonable levels did the motor begin to bog.
Large, round and made from wood, they are very comfortable and give firm feel of control.
This is a very nice feature that lets you set the rough height for different length bits quickly.When operating a power tool outside, use an outdoor extension cord marked "W-A"or "W."These cords are rated for outdoor use and reduce the risk of electric shock.Suffice it to say the system works great.Warning instructions and tool manual for use of these accessories.Shaft collet installinouter BIT wrench wrench Place router upside down or lay router on its side with the base resting on the bench.