airlink usb 2.0 manual amps240w

Otherwise, select dhcp Assign Automatically and click Next.
Section 3 Section 3 Configuring the Printer Server Note: The following steps only need to be performed one time from one computer.
For WEP encryption, select WEP and enter your settings into the boxes below.
Quick Installation Guide, nec dsx telephone system manual wireless USB.0 1-Port Multi-Functional Printer Server.This Quick Installation Guide only provides basic instructions.Step 6 Once the installation is complete, make sure that the Launch PS-Link box is checked and click Finish.Step 9 If your network uses a workgroup nero express 8 full crack name other than workgroup, you can enter it here, or accept the default settings, and click Next.Step 4 Click Next at the welcome screen.Step 5 Click Next at the Select Program Folder.Step 11 Click Save to save the changes to your print server.Step 3 Click Next at the welcome screen.Remember to repeat all steps in Section 4 on each of the computers you plan to use with the print server.If you have a router, you will want to choose Infrastructure mode.Step 1 Power down the printer and the printer server.Note: If the autorun window does not appear automatically, go to Start - Run and type D:UtilitySetup.



If you are using encryption, you can get the encryption settings from your router or router manufacturer and enter them here.
For WPA-PSK, Select WPA-PSK and enter your Pre-Shared Key into the box.
If you do not use encryption, click Disable and then Next.
Step 1 Click the Discover button and your printer should show up under Server Name.Actual data throughput will vary.Once the printer is powered on, connect the print servers power adapter to an electrical outlet.The default password is admin.Step 2 Click the Discover button and your printer should show up under Server Name.If you are using the print server wirelessly, please refer to Section 5 for wireless troubleshooting steps.Driver Utility CD, quick Installation Guide, section.Section 2 Installing the PS Software Note: The PS Software must be installed on all computers you plan to use with the print server.If you do not have a specific Server Name, Port Name, or Password that you would like to use, click Next to accept the default settings.Step 4 Click OK at the Link Successfully screen.